Servicing a Daytona Coupe in Sydney
- A workshop in Sydney that can service a Daytona Coupe
- Daytona mechanical maintenance, repairs or upgrades for road or track

Peninsula Sports Cars is a classic sports car workshop in Brookvale, Sydney, that can provide a wide range of mechanical services even for vehicles like the rare Daytona Coupe.
The Daytona Coupe is one of those cars that doesn’t need an introduction. Born from Carroll Shelby’s answer to beating Ferrari at Le Mans, the Coupe is all about brutal speed, aero efficiency and race-bred attitude. By the late ’90s, continuation and replica Daytona Coupes were being built to capture that same spirit with big V8’s, side pipes, minimal comfort and zero tolerance for laziness in the mechanicals.
This 1998 Daytona Coupe came to Peninsula Sports Cars needing exactly what these cars often do: attention to the systems that let it run safely, reliably and hard.
No cosmetic fluff — just getting the fundamentals right.
There’s no definitive registry of Daytona Coupes specifically in Australia, but based on information available;
Only six original Shelby Cobra Daytona Coupes were ever built by Carroll Shelby in the 1960s — all six still exist and are accounted for in museums or private collections worldwide. None are regularly registered on the road in Australia.
There are continuation and replica versions of the Daytona Coupe (Superformance Shelby Daytonas, Factory Five Type 65 and Aussie Daytona Sportscar derivatives). These are far more common on the road and in historic motorsport events, but there’s no central count of exactly how many are in Australia.
One specific example that has appeared at auction and in Australian ownership is a Superformance Daytona Coupe noted as the only one of its type in Australia at the time.
Additionally, there’s an Australian-built Daytona Sportscar, sometimes referred to as a Daytona Coupe, with around eight built in Australia by Borland Racing Developments.
Therefore the reality is they are pretty rare.
Daytona Coupe fuel systems
- Daytona Coupe fuel system servicing

On classic cars like this, the fuel system is everything. Age, ethanol fuels and long periods of sitting can take their toll fast so the entire system was refreshed with:
- New fuel cell and foam
- New fuel lines, fittings and filter
- New fuel pump
- Carburettor rebuild
This ensures clean, consistent fuel delivery and eliminates the risk of leaks or vapour issues which is critical in a tight, high-heat engine bay.
Daytona electrical and cooling problems solved
- New cooling system
- Refurbished electrical wiring

Checking over all the basics included the electricals where we put new spark plugs in as well as plug leads and insulation boots. From there the cooling system was checked and flushed, removing old deposits and ensuring the engine can manage heat no small thing in a Daytona Coupe with limited airflow at low speeds.
Then the rest of the electrical system was fully inspected and refurbished where needed with an Anderson plug fitted for a remote starter battery making this a practical upgrade for a car that isn’t driven every day but needs to fire instantly when called upon.
Daytona coupe braking systems
- Brake system inspection & refurbishment
- New tyres

Next step was to make sure it could stop so the braking system was refurbished and lines flushed, restoring pedal feel and confidence because there is no point having big power if you can’t haul it up. Sourcing tyres was a job in itself because large, rare sizes had to be tracked down and fitted, ensuring correct stance, grip and safety – both of these are areas that we don’t compromise on.
Lastly a new battery was installed and the air intake refreshed with a new air cleaner.
Daytona coupe exhaust system
- Exhaust fabrication
- New exhaust installation

To finish it off this project new stainless steel side exhaust pipes were fabricated so that they don’t just look right but they can they handle heat better, last longer and deliver the sharp, aggressive exhaust note a Daytona Coupe is supposed to have.
Getting a Daytona Coupe ready for the track
This Daytona Coupe is now what it should be: fuel-safe, electrically sound, mechanically sorted and ready to be driven hard on the track, not tip-toed around. It’s still raw, loud and unapologetic, just without the risk and uncertainty that comes from ageing components.
That’s the Peninsula Sports Cars approach: identify the weak points, fix them properly, and make sure the car can be enjoyed the way it was meant to be.
If you want to get a Daytona Coupe or other classic sports car serviced, repaired, modified or restored in Sydney then our workshop in Brookvale can help you. You might require regular servicing or want to carry out a nut and bolt restoration.
We have a team of sports car mechanics in Sydney are not only experienced but they all own classic cars themselves, so you get to deal with like minded enthusiasts who are as passionate (or maybe more) than you are.
Enquire about getting work done to your vehicle



